Reka Klebetechnik GmbH & Co. KG

Siemensstr. 6, 76344 Eggenstein-Leopoldshafen
Germany
Telephone +49 721 970780
Fax +49 721 705069
drupa21@reka-klebetechnik.de

Location

  •   Hall 9 / A02

Contact

Katharina Armbruster

Phone
+49 (0) 721 970 78 - 30

Email
drupa21@reka-klebetechnik.de

Marina Uhler

Phone
+49 (0) 721 970 78 - 30

Email
drupa21@reka-klebetechnik.de

Claudia Weigle

Phone
+49 (0) 721 970 78 - 30

Email
drupa21@reka-klebetechnik.de

Our range of products

Product categories

  • 03  post press / converting / packaging
  • 03.01  Bookbinding machines and print finishing machines
  • 03.01.305  Adhesive applicating machines and devices

Adhesive applicating machines and devices

  • 05  materials
  • 05.09  Adhesives and glues
  • 05.09.020  Hotmelts (EVA, PA, PO)

Hotmelts (EVA, PA, PO)

  • 05  materials
  • 05.09  Adhesives and glues
  • 05.09.025  Hot-melt pressure-sensitive adhesives (HMPSA)

Hot-melt pressure-sensitive adhesives (HMPSA)

  • 05  materials
  • 05.09  Adhesives and glues
  • 05.09.030  Polyurethane (PUR) adhesives

Polyurethane (PUR) adhesives

Our products

Product category: Adhesive applicating machines and devices

TR60LCD

TR60LCD

More Less

Product category: Adhesive applicating machines and devices

MS200E

MS200E

More Less

Product category: Adhesive applicating machines and devices

MS200E

MS200E

More Less

Product category: Adhesive applicating machines and devices

MS 200.E

Hot-Melt Glue ApplicatorGun MS 200.E – Easy Processing of Hot-Melt without compressed air.
The MS 200.E lets you process hot-melt granulates, pillows and even 43mm sticks effortlessly and hassle-free. It doesn’t even require air pressure and thanks to the 500 watt heater it is ready to go within minutes. The comfort locking and big opening lets you fill the 250 ml tank with ease.

Thanks to the electronic temperature regulation the hot glue is kept at a precise temperature and protected against coking. This makes the MS 200.E a great tool for temperature sensitive hot-melts like PA, polyamide based glues. The adjustable temperature range is 30 to 200 degrees celsius, this enables you to apply materials with an especially low melting point like wax.

The MS 200.E is well suited to work in dusty and demanding work environments. The ergonomic handle and adjustable trigger enable a continuous workflow and is well-suited for smaller hands as well as right and left-handed people alike. The integrated magnetic foot lets you pick the applicator up and put it down in the blink of an eye and is a real time saver. A wire stand makes sure the device can also be placed securely on non-magnetic surfaces.

Combined with the reka nozzle portfolio the MS 200.E handles countless applications comfortably, powerful and professional.

More Less

Product category: Adhesive applicating machines and devices

TR 50.5 Glue Gun

TR 50.5 Glue Gun – Best Gluing Results with comfortable Air Pressure Application and Comfort Locking
The all new TR 50.5 applies hot-melt glue granulate, pillows and even 43 mm sticks easily and precisely. With the innovative comfort locking refilling glue has never been that convenient. The hot glue is extracted with compressed airwhich enables the user easy operation and a continuous workflow. 

Thanks to the electronic temperature regulation the TR 50.5 is ready to go within minutes and keeps the set temperature accurately to achieve the best gluing result. Due to the stable temperature the glue is also protected from degenerating or coking. The temperature can be set from 170 to 190 °C. The TR 50.5 is well suited to work in dusty and demanding work environments and the 250 ml capacity is enough to make numerous bondings.

Combined with the reka nozzle portfolio the TR 50.5 handles countless applications comfortably, powerful and professional.

More Less

Product category: Adhesive applicating machines and devices

TR 60 LCD

The TR 60 LCD Hot-Spray-System consists of the TR 60 LCD glue gun and the stand on which the gun may be deposited.
The TR 60 LCD is a hot-melt adhesive spray system. Spray application is a non-contact glue application, which means it goes easy on the materials that are about to be glued. Also, spray application allows covering great areas and using very little glue. A stand for storing with built in pressure regulator and manometer is part of the system and permanently attached to the TR 60 LCD, so setting the right glue output and spray pattern becomes very easy. The hot-melt adhesive is extruded through air pressure. Pneumatic glue guns increase work speed and simplify exact dosing of the glue. Thanks to the built in electronic temperature regulation the glue gun is ready to work within 3 to 10 minutes. Furthermore, it keeps the temperature on a constant level thus is a perfect suit for processing temperature-sensitive hotmelt glue. The LCD-display and push-buttons allow a precise temperature adjustment. This way, the user always knows the current temperature of the glue applicator and is able to apply the glue at the intended temperature. The TR 60 LCD hot-melt glue gun can be loaded with granulate, pillows and 43 mm slugs. It offers maximum flexibility for choosing the right glue and lets you benefit from cost-advantages ofdifferent shapes of hot-melt. The capacity of 250 ml is sufficient for numerous gluings. The TR 60 LCD can be switched to dot- and lineapplication with an adapter. The number of possible application patterns is widely extended by the Reka nozzle range. Almost all of the offered nozzles can be used with every Reka glue gun in combination with a separate adapter.

More Less

About us

Company details

Since 1977 Reka Klebetechnik has been offering its customers in over 70 countries reliable quality from Germany . In Eggenstein near Karlsruhe, Germany, Reka’s hand-operated hotmelt adhesive applicators are developed, produced and sold.

The devices are suitable for processing hot-melt adhesives in almost all forms available on the market. They are just as appreciated in industry as they are by craftsmen and packaging service providers. Whether in production, assembly or sealing – modern industrial products are no longer conceivable without adhesives.

The steady growth of the worldwide dealer network and the constant optimisation of the products strengthen the owner-managed family business. Reka Klebetechnik attaches great importance to long-term business relationships and durable products that are easy to maintain.

With its competent and motivated team, decades of market experience and cooperation with renowned adhesive manufacturers, Reka offers its customers needs-based and individual solutions. Reka helps you to select the suitable products for your application.

Reka stands for:

  •     Quality
  •     Customer satisfaction
  •     Practical solutions

More Less

Company data

Export content

max. 50%

Foundation

1977